Trailer Hitch Mount Bike Carrier - 4 Bikes (Thule Vertex 9029)

Details

• Unique arc design for easier bike loading and carrying performance
• High mast height for improved ground clearance
• New Hold Fast Cradles cushion bike and provide maximum bike security
• Anti-Sway Cages prevent bike-to-bike and bike-to-vehicle contact
• New and improved Hitch Switch folds arms down when not in use and tilts carrier away from vehicle for trunk, hatch or tailgate access
• Integrated handle for easy carrying and handling
• Fits both 1.25" and 2" hitch receiver
• Part #: 0000-RD-9029 or 0000-8E-Z20
  Installation Instructions

Special Notes

• Hitch with either 1.25" or 2" Receiver is required
  
• Loads up to four (4) bikes
  
• Load capacity: 63 kg (140 lb)
• Weight: 18.1 kg (40lb)
• Non-standard bike frames without a top cross bar may require the use of a frame adapter

Warnings & Limitations

• Never drive with any lock, knob or rack in an open or unlocked position
• Check tightness of all bolts and knobs periodically
  
• Check straps for wear and replace if worn
  
• Not intended for off-road use
  
• Not intended for tandems or recumbents
• Do not install on a trailer or other towed vehicle
• Failure to use strap may result in loss of bicycles
• Load heaviest bike closest to the vehicle and lightest bike last
• Remove your rack and accessories when they are not in use and before entering automatic car washes
• For safety to your vehicle and rack system, obey all posted speed limits and traffic cautions
• Adapt your speed to the conditions of the road and the load being carried
• Drive slowly over speed bumps 8-16 km/h (5-10 mph) maximum
  
• Do not transport bicycles with attached baby seats, panniers, wheel covers or full bike covers
• Set screw located on underside of the main backbone must remain installed. If screw is not in place there is a risk the bike tray can slide off the rack if not tightened properly